PRODUCTS
Conductivity Meters
EM31-MK2
EM34-3
EM38-MK2
Metal Detectors
Time Domain Systems
VLF Systems
Borehole Probes
Data Acquisition
Software
Third Party Software
Downloads

EM31-MK2 | EM31-SH

EM31-MK2

The EM31-MK2 maps geologic variations, groundwater contaminants, or any subsurface feature associated with changes in ground conductivity. Using a patented electromagnetic inductive technique that allows measurements without electrodes or ground contact. With this inductive method, surveys can be carried out under most geologic conditions including those of high surface resistivity such as sand, gravel, and asphalt.

Ground conductivity (quad-phase) and magnetic susceptibility (in-phase) measurements are read directly from an integrated DL600 data logger (which can be easily removed from the console for data transfer). Real Time (RT) graphical presentation of the data during collection is possible by connecting a computer directly to the RS232 output port on the front panel with an optional RS232 interconnect cable.

The effective depth of exploration is about six metres, making it ideal for geotechnical and environmental site characterization. Important advantages of the EM31-MK2 over conventional resistivity methods are the speed with which surveys can be performed, the precision with which small changes in conductivity can be measured and the continuous readout and data collection while traversing the survey area. Additionally, the in-phase component is particularly useful for the detection of buried metallic structure and waste material.

EM31-SH

The EM31-SH is a "short" version of the EM31-MK2 providing an effective depth of exploration of about four metres. With a smaller coil separation (2 m) and lighter weight, the EM31-SH offers improvements in sensitivity to smaller near-surface targets, lateral resolution and portability, while maintaining the high levels of accuracy and stability provided by the standard EM31-MK2. A "trailer-mount" (see photo) is available for either instrument, offering greater convenience in some field operations.

Specifications
MEASURED QUANTITIES
1: Apparent conductivity in millisiemens per metre (mS/m)
2: In-phase ratio of the secondary to primary magnetic field in parts per thousand (ppt)
INTERCOIL SPACING
3.66 metres
OPERATING FREQUENCY
9.8 kHz
POWER SUPPLY
8 disposable alkaline "C" cells (approx. 20 h continuous)
MEASURING RANGES
Conduct.:10,100,1K mS/m;
In-phase: +/- 20 ppt
MEASUREMENT RESOLUTION
+/- 0.1% of full scale
MEASUREMENT ACCURACY
+/- 5% at 20 mS/m
NOISE LEVELS
Conductivity: 0.1 mS/m
In-phase: 0.03 ppt
DATA STORAGE
10,000 records (2 components); 16,500 records (1 component); ext. memory available
DIMENSIONS
Boom: 4m ext.; 1.4m stored
Case: 145x38x23 cm
WEIGHTS
Instrument: 12.4 kg;
Shipping: 28 kg

 
             
Copyright  ©  2013 Geonics Limited. All rights reserved